34 www.emersonct.com SM-EZMotion Module User Guide
7.2.2.2 SM-EZMotion Module View
If SM-EZMotion is selected in the Slot # Module combo
box, the remainder of the view should be blank. The
hierarchy automatically updates to show that an
SM-EZMotion module is populated in that specific slot, see
Figure 55.
Figure 55: Slot # View (SM-EZMotion Module)
7.2.2.3 SM-I/O Plus Module View
If I/O Plus is selected in the Slot # Module combo box, the
remainder of the view should have configuration
parameters for the modules Digital Inputs and Outputs.
The hierarchy automatically updates to show that an SM-I/
O Plus module is populated in that specific slot, see Figure
56.
Figure 56: Slot # View (SM-I/O Plus Module)
7.2.2.4 SM-Universal Encoder Plus Module View
If Universal Encoder Plus is selected in the Slot # Module
combo box, the remainder of the view should have
configuration parameters to define what type of encoder is
being used and to define the encoder properties. The
hierarchy automatically updates to show that a
SM-Universal Encoder Plus module is populated in that
specific slot, see Figure 57.
Figure 57: Slot # View (SM-Encoder Plus Module)
7.2.2.5 SM-Resolver Module View
If Resolver is selected in the Slot # Module combo box, the
remainder of the view should have configuration
parameters to define the resolver properties. The hierarchy
automatically updates to show that a SM-Resolver module
is populated in that specific slot, see Figure 58.
Figure 58: Slot # View (SM-Resolver Module)
To Next Page
Loading...
