Emerson SolaHD SDU DC UPS B Series - Battery Options; Optional Accessories; Product Description

Page: 3
Battery Options
Two battery modules are available:
• SDU 24-BATB: 24 V DIN rail/panel mount battery module (cable included).
NOTE: Up to 4 SDU 24-BATB modules can be connected to the UPS.
• SDU 24-BATEM: 24 V external mount battery module (cable included).
NOTE: Only 1 SDU 24-BATEM module can be connected to the UPS.
NOTE: A combination of both modules cannot be used with the UPS.
Optional Accessories
• SDU 24EXTBC6: 1ft (30.5cm) battery module cable.
• SDU 24-DB9: Interface kit to convert relay contact signals to DB9 signals.
• SDU-PMBRK: Chassis mounting brackets to secure the UPS to the wall, back of the panel, or enclosure.
Product Description
Figure 1 Figure 2
1. Output LED: Indicates the output status of the DC UPS. See Table 1.
2. Battery LED: Indicates the status of the battery module connected to the DC UPS. See Table 1.
3. Contact Relay Terminals: The control module incorporates dry relay contacts for remote signaling of the
UPS and battery module status.
4. Remote ON/OFF Terminals (R1 and R2): Turns the unit ON/OFF.
5. DC Input/Output Screw Terminal Connections: IP20 rated input and output screw terminals.