EasyManua.ls Logo

Emerson SolaHD SDU AC B Series User Manual

Emerson SolaHD SDU AC B Series
28 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Uninterruptible Power Supply
User Manual
SDU AC B-Series
Question and Answer IconNeed help?

Do you have a question about the Emerson SolaHD SDU AC B Series and is the answer not in the manual?

Emerson SolaHD SDU AC B Series Specifications

General IconGeneral
Input Frequency50/60 Hz
Output Frequency50/60 Hz
Form FactorTower
Communication InterfaceUSB, RS-232
Operating Temperature0°C to 40°C (32°F to 104°F)
Storage Temperature-15°C to 45°C (5°F to 113°F)
Humidity0-95% non-condensing
Battery TypeSealed Lead-Acid (SLA)
WeightVaries by model
Efficiency>95% (Typical)

Summary

What's Included

Optional Accessories

1.0 Introduction

2.0 Important Safety Instructions

2.1 Safety Precautions

Key safety guidelines and warnings for installation and operation. Save these instructions.

3.0 General Description

Front Panel Indicators

Description of status LEDs and their meanings: Power, Alarm, Battery, AC Input Normal.

Input and Output Terminals

Details on IP20-rated screw terminals for input and output connections.

Communication and Control Ports

Information on USB port, COMM PORT for cards, and REMOTE ON/OFF terminals.

4.0 System Block Diagram

5.0 Installation Instructions

Installation Notices and Requirements

Critical warnings, placement, airflow, and DIN rail mounting guidelines.

Comm Card and Location Setup

Instructions for installing comm cards and selecting the UPS location.

DIN Rail Mounting Procedure

Step-by-step visual guide for mounting the UPS onto a DIN rail.

Removing Unit from DIN Rail

Instructions on how to detach the UPS unit from the DIN rail.

I/O Wiring and Internal Battery

Guidance on wiring connections, wire gauge, screw torque, and initial battery charging.

6.0 Operating Instructions

Turning On the UPS

Detailed steps for initial power-on, including disabling PowerLock feature.

Turning Off the UPS

Procedure for safely shutting down the UPS unit.

Alarm Management

How to enable/disable alarms and silence them during backup mode.

Self-Test Function

Explanation of the UPS's self-diagnostic feature for operation and battery condition.

Standby and Green Modes

Explains Standby mode and Green mode (for 230V models) for power saving and load management.

Remote ON/OFF Control

How to use a switch on terminals to remotely control the UPS power state.

Remote Enable/Disable Wiring

Visual guide and explanation for wiring remote ON/OFF switches.

7.0 LED Diagnostics

8.0 Battery Replacement

Battery Replacement Steps

Step-by-step instructions for safely replacing the UPS battery.

Battery Removal and Space Requirements

Visual guide for battery removal and notice on required clearance space for replacement.

9.0 Troubleshooting

10.0 Technical Specifications

10.1 UPS Battery Specifications

Details on the internal UPS battery type, capacity, and backup time at different load levels.

10.2 Storage and Recharging

Guidelines for storing the UPS, including temperature ranges and battery recharging frequency.

Environmental, Weight, and Certifications

Specifications related to operating environment, physical dimensions, weight, and safety/EMC certifications.

Battery Back-Up Time Chart

Table showing approximate backup times for different models and load levels.

11.0 Software and Interface

Power Monitoring Software (UPSwatch)

Information on the UPSwatch software for monitoring, diagnostics, and control.

Technical Support

Warranty Information

Reference to the warranty terms and conditions provided with the UPS packaging.

Related product manuals