Emerson U40310001 - Page 15

1-6-3 H94X1IB
s Button
Press to cancel a setting of timer program. Press to
correct digits when setting program (For example:
setting clock or timer program). Press to add or
delete channel numbers during channel preset.
4
7. ENTER Button
DVD mode
Press to accept a setting.
4
8. g Button
DVD mode
Press to fast forward the Disc. Press PAUSE, then
press this button to begin slow motion playback.
Press this button repeatedly to change the forward
speed of slow motion.
VCR mode
Press to rapidly advance the tape, or view the pic-
ture rapidly in forward during playback (Forward
Search).
4
9. PLAY Button
DVD mode
Press to begin playback.
VCR mode
Press to begin playback.
5
0. VCR Button
Press to select VCR mode for the remote control.
You can switch the OUTPUT mode either by press-
ing OUTPUT on the front panel, or by pressing
DVD or VCR on the remote control. However, if
you press OUTPUT on the front panel first, you
need to re-select the corresponding mode by
pressing DVD or VCR on the remote control.
51. PAUSE Button
DVD mode
Press to pause Disc playback. Press repeatedly
to
advance the DVD picture step by step (or on
e
frame at a time).
VCR mode
While recording, press to temporarily stop th
e
recording (pause). Press a second time to resum
e
normal recording. You can not pause a One-Touc
h
Recording. Or, press during tape playback
to
freeze the picture. Press to advance the picture on
e
frame at a time during still mode.
52. SLOW Button
During tape playback, press to view the video tape
in
slow motion. To return to playback, press PLAY.
This button does not affect DVD playback.
53. VCR/TV Button
Use to select VCR or TV position.
VCR Position
To view playback, to monitor video recording or
to
watch TV using the VCR tuner.
TV Position
To watch TV or to view one program while recor
d-
ing another.
54. SKIP/CH. Buttons
DVD mode
Press to skip Chapters or Tracks.
VCR mode
Press to change TV channels on the VCR.
55. AUDIO Button
Press to select a desired audio language or soun
d
mode.
Notes
To use the remote control to operate the DVD/VC
R
COMBINATION UNIT and its features, press DVD o
n
the remote control before pressing other DVD oper
a-
tion button. Verify that the green DVD OUTPUT Lig
ht
is on.
To use the remote control to operate the VCR and i
ts
features, press VCR on the remote control befo
re
pressing other VCR operation button. Verify that th
e
green VCR OUTPUT Light is on.