Emerson UNIDRIVE M600 - Page 46

46 SI-Ethernet User Guide
Issue: 1
The 48-bit MAC address of the module.
Selection of the fieldbus protocol to have priority over all other protocols.
Enables selection of one fieldbus protocol to have priority over others. A tick period of 1
ms will be given to the highest priority fieldbus protocol, 5 ms to all other fieldbus
protocols (equal priority).
If no fieldbus protocol has been selected to have priority over others, all protocols will
have equal priority and a tick rate of 5 ms.
Controls the running of the web server on the module.
S.02.011 MAC Address
Minimum
0
(Display:00.00.00.00.00.00)
Maximum
281474976710655
(Display:FF:FF:FF:FF:FF:FF)
Default Units
Type 64 bit volatile Update Rate Power-up write
Display Format MAC Address Decimal Places 0
Coding RO, ND, NC, PT, BU
S.02.020 Priority Protocol
Minimum 0 Maximum 2
Default 0 Units
Type 8 Bit User Save Update Rate Background read
Display Format None Decimal Places 0
Coding RW, TE, BU
Value Text Description
0 None All protocols have equal priority
1 Modbus TCP Modbus TCP has highest priority
2 EtherNet/IP EtherNet/IP has highest priority
S.02.021 Web Server Enable
Minimum 0 Maximum 1
Default 1 Units
Type 1 Bit User Save Update Rate Background read
Display Format None Decimal Places 0
Coding RW, BU
The web server functionality is not currently implemented.
NOTE