SI-Ethernet User Guide 27
Issue: 1
Safety
information
Introduction
Mechanical
installation
Electrical
installation
Getting started Parameters
Key features
and Protocols
PC Applications Security Diagnostics
Glossary of
terms
Index
10.048
Rx1 Timeout
Event
Type
No Event (0),
Event
(1)
,
Event1
(2),
Event2
(3)
,
Event3
(4)
No Event
(0)
RW Txt US
10.049 Rx1 Link Status
VLAN disabled (-30),
Reserved 29 (-29),
Reserved 28 (-28),
Reserved 27 (-27),
Reserved 26 (-26),
Reserved 25 (-25),
Reserved 24 (-24),
Reserved 23 (-23),
Reserved 22 (-22),
SYNC unsupported (-21),
MEC offset (-20),
Invalid tx rate (-19),
Too many mapping (-18),
Link busy (-17),
Invalid profile (-16),
Invalid mapping (-15),
Read only param (-14),
Msg mismatch (-13),
Msg too long (-12),
Attrib NA (-11),
Attrib RO (-10),
Attrib missing (-9),
Timeout (-8),
In error (-7),
Link num in use (-6),
Not editable (-5),
Invalid link num (-4),
Invalid args (-3),
Too many links (-2),
Out of memory (-1),
OK (0),
Not running (1),
OK sync (2)
OK (0) RO Txt
10.050 Rx2 Link Profile Std (0), Sync (1) Std (0) RW Txt US
10.051 Rx2 Link Number 0 to 255 0 RW Num US
10.052
Rx2 Destination
Parameter
0.00.000 to 4.99.999 0.00.000 RW SMP US
10.053
Rx2 Parameter
Count
0 to 10 0 RW Num US
10.054 Rx2 Source Type
Direct (0),
Multicast1 (1),
Multicast2 (2),
Multicast3 (3),
Multicast4 (4),
Local (5)
Direct (0) RW Txt US
10.055 Rx2 Timeout 0 to 65535 ms 100 ms RW Num US
10.056 Rx2 Timeout Action
Trip (0),
Clear output (1),
Hold last (2)
Trip (0) RW Txt US
Parameter Range Default Type
To Next Page
Loading...
