2
Scope of delivery
Please check the content of the package, before starting with the instal-
lation and commissioning.
y 1 LZQJ-XC device
y 1 Installation and commissioning instruction
If the content is incomplete or damaged, please contact your source of
supply. Store, use and transport the meter such, that it is protected from
moisture, dirt and damage.
Important notes
This instruction is part of the documentation. All versions of the LZQJ-
XC are described in this instruction. Therefore characteristic features
may be described, which are not valid for your device.
For further information about the LZQJ-XC refer to the product
manual. Pay attention to all component accompanying docu-
ments when operating the LZQJ-XC.
Target group
This instruction is intended for technicians who are responsible for
installation, connection and maintenance of the device. The devices
have to be installed and put into operation only by qualied electricians
in accordance with generally accepted rules of technology and the
regulations, which are relevant for the installation of telecommunications
equipment and end devices.
Intended use
The meter has to be used for measuring electrical energy only and has
to operate within the specied values (refer to nameplate).
Maintenance and warranty information
The devices are maintenance-free. In case of damage (e. g. due to
transportation, storage) no repairs may be carried out independently.
If a defect is caused by external inuences (e.g. lightning, water, re,
extreme temperatures and weather conditions) or by incorrect or negli-
gent use or handling, the warranty claim and Declaration of Conformity
become invalid. The same applies if seals are broken.
Only authorised personnel are allowed to break the sealing!
To Next Page
Loading...
Need help?
General
