22
Error register F.F
The meter has an error register with 32 error ags (eight-digit hexadeci-
mal value), which registers the functional errors of the meter.
The output of the error tab is performed via the display and one of the
read-out lists.
Meaning of the error ags:
F.F(00000000) No error
F.F(00000001) Incomplete data backup
F.F(00000002) Incomplete cumulation
F.F(00000003) Incomplete data backup +
Incomplete cumulation
F.F(00000004) Invalid ash-data (no valid data backup
found)
F.F(00000005) Incomplete data backup +
Invalid ash-data
F.F(00000006) Incomplete data backup +
Incomplete cumulation
F.F(00000007) Incomplete data backup +
Incomplete cumulation +
Invalid ash-data
F.F(00000100) Error in par-checksum
F.F(00000200) Error in set-checksum
F.F(00000300) Error in par-checksum +
Error in set-checksum
F.F(00000400) Error in code-checksum
F.F(00000500) Error in par-checksum +
Error in code-checksum