suggest to rename the network name to: network name + AP so you will always
know that you are connected as Access Point.
9. You also have the option to secure the Wi-Fi network by adding an security key.
Fill in wireless security code in Key Value field.
10. Click “Save/Apply” to confirm. The repeater will reboot and make the changes.
This will take approximately 1 minute.
11. Remove the repeater from the power socket.
12. Install your Ethernet cable from modem/router or router into the “LAN” port of the
repeater.
13. Connect the EM4595 back to the wall outlet.
14. Wait until the “smart led indicator” lights up the three leds. This will take
approximately 1 minute.
15. You can now make wireless connection with new made network name ( SSID )
configured as Access Point.
7.0 Frequently Asked Questions and other
related information
The latest Frequently asked questions for your product can be found on the support
page of your product. Eminent will update these pages frequently to assure you have
the most recent information. Visit www.eminent-online.com
for more information about
your product.
8.0 Service and support
This user manual has been carefully written by Eminent’s technical experts. If you
have problems installing or using the product, please fill out the support form at the
website www.eminent-online.com/support
.
You can also contact us by phone. Please check www.eminent-online.com/support for
the helpdesk phone number and opening hours.
9.0 Warning and points of attention
Due to laws, directives and regulations set out by the European parliament, some
(wireless) devices could be subject to limitations concerning its use in certain
European member states. In certain European member states the use of such devices
could be prohibited. Contact your (local) government for more information about this
limitations.
Always follow up the instructions in the manual*, especially where it concerns devices
which need to be assembled.
To Next Page
Loading...
