EMKO TRANS-AMF - Expansion Module Configuration

23
Min
Default
Unit
Max
0
2
20(dis)
10
4
20
2
2500
Sec
0
1
0
21 2
5
0-Disable
1-UserConfigured
2-SelectFromList
0-NormallyOpen(Close To Activate)
1-NormallyClose(Open To Activate)
IfUserConfigured
0-Status
1-WarningNon-Latching
2-WarningLatching
3-Electrical Trip
4-Shutdown
IfUserConfigured
0- ActiveFromStarting
1- ActiveFromSafetyOn
2- Always Active
IfSelectFromList
2-AuxiliaryMainsFail
3-WorkingCalendar Active
4-Master AutoReady
5-Simulate AlarmResetButton
6-Simulate AutoButton
7-Simulate TestButton
8-SimulateManualButton
9-SimulateStartButton
10-SimulateStopButton
11-GeneratorClosed Auxiliary
12-GeneratorLoadInhibit
13-MainsClosed Auxiliary
14-MainsLoadInhibit
15-AutoRestoreInhibit
16-AutoStartInhibit
17-PanelLock
18-ScheduledRunsInhibited
19-PrioritySelect
20-Transfer ToGenerator/OpenMains
21-Transfer ToMains/OpenGenerator
Input active delay
010
0- ( To )
1- ( To )
>-Ve Switched Battery-
>+Ve Switched Battery+
CONF. EXP. INPUT-X ( )Inputs->Conf. exp. input-x
Dis,user conf.or list
Polarity
Indication
Activation
Select from list
Active delay
Hardware type
Note-1: x=1(exp.input ),2( ),3( ),4( ),5( ),6(
)
exp.input exp.input exp.input exp.input exp.
input ,7(exp.input )or8(exp.input )
dis=disableNote-2:
-1 -2 -3 -4 -5
-6 -7 -8