Emlid REACH RS2+ - Page 5

5
Set up for a single Emlid rover using SIM card
Insert your SIM card (with Internet subscription) into the
Reach RS2 / RS2+ / RS3 unit (see blue arrow).
Follow the guide above (Connecting the Emlid Flow App
to the Emlid unit) to connect your phone or tablet to the
Emlid Reach RS2 / RS2+ / RS3 unit.
Go to the Mobile data settings in the app, enter a PIN code if needed and fill out the information
regarding APN (Access Point Name). When all the information has been added, turn on the
Mobile data.