Emmaljunga Big Star SENTO - Seat unit (FLAT accessories); Seat Unit Assembly; Attaching and Removing Seat Unit; Hood Adjustment

37
SE
2-8
EN
27-44
2-8
DK
9-26
Big Star SENTO, Big Star SENTO MAX, V 1.0
Seat unit (FLAT accessories)
1) Assembly of the seat unit
1. The seat unit is delivered fully
assembled. Only the bumper bar and
the hood need to be assembled. Insert
the bumper bar into the brackets on
both sides of the seat until you hear a
click.
2. Fasten the crotch strap around the
bumper bar.
3. Insert the hood in both sides of the
seat until you hear a click.
4. Secure the back of the hood by
using the 2 hooks. You can click
Emmaljunga’s footmuff (accessory) into
place using the eyelets/D-rings behind
the backrest.
WARNING
• Ensure that children are kept away
from all moving parts of the stroller to
avoid risk of injury.
• It is important that the seat unit fabric
is always correctly tted
• Never use the stroller without making
sure the seat unit fabric is correctly
assembled on the frame rst.
• The bumper bar should always be
tted when using the seat unit.
• Always check that the bumper bar
is correctly attached to the seat unit
before use.
• The hood should always be
assembled when the stroller is in use.
• Never carry the seat unit/stroller by
the bumper bar.
2) Attach/remove the seat unit
1. Engage the brake. Click the seat unit
into the chassis, make sure it clicks in
properly and securely on both sides.
The seat unit can be attached in
the direction of travel or against the
direction of travel.
2. Pull both handles on the sides upwards
and lift the seat unit off the chassis.
WARNING
• Ensure that children are kept away
from all moving parts of the pram to
avoid risk of injury.
• Always check that the seat unit is
securely xed to the chassis before
the pram is used.
• Hold the carrying handles until the
seat unit is in place.
• Never leave a child in the seat unit
when removing/attaching the seat
unit.
3) Adjust the hood
1. Pull the hood gently forward or
backward to the desired position.
2. Open the zipper to add more
ventilation.
WARNING
• Ensure that children are kept away
from all moving parts of the pram to
avoid risk of injury.
4) Open/close the bumper bar
1. Unfasten the crotch strap. Press the
button on the inside of the bumper bar
to open.
2. Press the bumper bar into the bracket
until you hear a ”click”.
WARNING
• The bumper bar should always be
tted when using the seat unit.
• Always check that the bumper bar
is correctly attached to the seat unit
before use.
• Fasten the crotch strap around the
bumper bar.
• Never carry the seat unit/stroller by
the bumper bar.
5) Adjust the backrest/ footrest
1. The backrest angle is adjustable. Pull
the grey handle upwards and adjust the
backrest angle carefully by pushing the
backrest forward or backward.
2. Pull the grey handle on the side of the
footrest to adjust it. Note: Maximum