How to use the Classic / Smart chassis
Engaging the Parking brake
• Engage the parking brake by pushing down with your foot.
• Disengage the parking device by pulling up.
WARNING
• Never leave the vehicle without rst engaging the parking brake.
• The pram's brake should always be engaged when you lift your
child in and out of the pram.
• Avoid uphill or downhill parking.
• Models with cog brakes: Ensure that the wheel cogs are securely
attached to all four wheels.
• Models with cog brakes: Ensure that the brake pin is rmly secured
in the wheels’ cog brakes when the vehicle’s brake is engaged.
• To make chassis even more compact, remove wheels by pressing
the wheel hub release buttons and pulling the wheels off the axle.
IMPORTANT
• Wipe off the axle stub before reattaching wheels.
WARNING
Make sure children are clear of any moving parts if you adjust the
stroller, otherwise they may be injured.
Folding the chassis
• Start by making sure that the brake is engaged.
• Ensure the front wheels ar in the swivel position by pulling the lock-
ing ring up.
• Fold the chassis by rst pressing in the buttons (5) at the same time
and pull the two main locking devices, one on each side upwards
(6).
• Lift the secondary locking device (7) and fold the handle forward.
• If you need to make more space you can remove the wheels by
pressing in the hub cap’s release mechanism and pulling the wheel
off the axle.
• Wipe off any dirt or grease from the axles before you replace the
wheels.
English
To Next Page
Loading...
