Assembly of De Luxe Chassis
WARNING
Make sure children are clear of any moving parts if you adjust the
stroller, otherwise they may be injured.
WARNING
• Always make sure that the main locking device (6) and the button
(7) on both sides clicks into locked position .
• The safety catch (8) (secondary locking mechanism) is activated to
prevent unintentional folding if the chassis locks are not locked into
position.
• Make sure, before you use the pram that both chassis locks are in
locked position.
WARNING
Make sure children are clear of any moving parts if you adjust the
stroller, otherwise they may be injured.
Assembly of Chassis
• Engage the parking device (3). Unfold and extend chassis by pull-
ing up on the handlebar (5) while holding down on the chassis side-
bar (4)
WARNING
The chassis-locks (6) must click into locked position.
• Make sure the parking device is not engaged. Depress release
button (1) on wheel hub, slide the wheel all the way onto axle (2).
Release the button and pull wheel toward you until you hear a click.
WARNING
• Pull wheel hub towards you to be sure the wheel is securely
attached.
Repeat the procedure on each of the four wheels.
Attaching Wheels
• Remove plastic protectors from chassis axles.
Save for future use.
IMPORTANT
• Axles may be covered with axle grease, and can leave stains on
fabric.
WARNING
• Choking Hazard - Keep plastic protectors away from children.
To Next Page
Loading...
