Adjusting the Backrest
• Raising the backrest: Raise the backrest into desired position by
pushing it forward.
• Lower the backrest: Push the backrest lever (18) toward the seat
frame and push the backrest into desired position.
WARNING
• Once desired position is set, push on backrest to ensure that it is
locked into one of it’s 3 positions.
Adjusting the Hood
• Adjust hood by gently pulling the front of the hood back or forth to
desired position.
• Certain models have an integrated mosquito net in the hood. It can
be pulled over the footrest and attached with plastic hooks to the
hood.
IMPORTANT
• Never carry the seat unit by the hood.
• Never lift the pram body/seat-unit when it is assembled onto the
chassis.
WARNING
Make sure children are clear of any moving parts if you adjust the
stroller, otherwise they may be injured.
Adjusting the Footrest
• Adjust the footrest to the down position by releasing the lock (19) on
the side of the footrest and pulling the footrest horizontally (19a) and
downwards (19b).
• The footrest is adjusted into its horizontal position by lifting the footrest
and pushing it horizontally towards the pram.
•
Make sure that the footrest is locked into desired position before usage.
• The footrest cover is reversible.
WARNING
• Never let your child/children stand on the footrest.
WARNING
Make sure children are clear of any moving parts if you adjust the
stroller, otherwise they may be injured.
Folding the chassis
• Start by making sure that the brake is engaged.
• Fold the chassis by rst pressing in the buttons (22) at the same
time and pull the two main locking devices, one on each side up-
wards (23).
How to use the vehicle
English
• Lift the secondary locking device (24) and fold the handle forward.
• If you need to make more space you can remove the wheels by
pressing in the hub cap’s release mechanism and pulling the wheel
off the axle.
• Wipe off any dirt or grease from the axles before you replace the
wheels.
To Next Page
Loading...
