Assembly of pram body
Attach the hood
• Attach the hood to the pram body by pushing the plastic leg of the
hood into the plastic holders on the pram body. Make sure they
snap into place.
• Press the hood fabric onto the plastic holder (12), on each side.
Press stud the collar (13) onto the pram body.
WARNING
The pram is delivered with a hood and it must always be assem-
bled when the pram is in use.
• Press the apron onto the hood (14) and onto the plastic holder
(15) on each side.
IMPORTANT
• The hood cannot be folded down when the apron is snapped onto
the hood without releasing the press studs (14)
• Insert the mattress (11).
WARNING
When using the Exclusive mattress (accessories)
• The exclusive mattress consists of a combination of bre lling
and polyeter lling. Make sure that you place the mattress with the
rmer polyeter lling facing downwards in the pram body.
• Do not place any additional mattresses in the pram body. Only use
the original Emmaljunga mattress that is included with the product
or the Emmaljunga Exclusive mattress (accessories) .
• Turn over the backrest (10) to its layback position.
To Next Page
Loading...
