Assembly of seat-unit
• Place the shoulder straps through the holes in the back of the seat
unit fabrics (4).
• Place the waist straps through the holes in the seat fabrics (5).
• Place the crotch straps through the holes in the base and the
seat unit (6).
• A harness with shoulder and crotch straps contains two shoulder
pads and one larger crotch pad. Place the shoulder pads over the
two shoulder straps (7). Attach the waist harness with the lock (8).
Put the crotch pad over the crotch strap.
Attach the seat-unit and the 5-point harness
• Press the back rest release mechanism (1) and move the backrest
to its up most upright position (2).
• Release the shoulder and waist straps from the harness lock before
you assemble the seat unit. Place the seat unit fabric's back pocket
(3) over the seat unit's backrest.
WARNING!
Make sure that the fabrics are in place before use
3
3
4
6
5
5
7
8
8
2
3
4
1
2
1
28
Manual Nitro City v. 1.8
To Next Page
Loading...
