English
39
Manual Nitro City v. 1.8
Delivery Check
Check that all rivets, screws and nuts are securely fastened.
Check that all poppers and zips on the seat fabrics and the tray are correctly and
securely attached.
Make sure that there are no other visible differences on the chassis, seat fabrics, tray
and wheels.
1. Check that the following items are present in the correct numbers:
2. Check the functions of the chassis.
3. Wheel and brakes
4. Overall inspection of the product
1 pc seat-unit with 5-point harness
1 set of shoulder pads for harness
1 pc folded chassis with tray
2 pcs wheels 300 mm
2 pcs Swivel wheels
1 pc raincover
1 pc instruction manual
1 pc hood
1 pc seat-fabrics
1 pc footrest cover
1 pc bumper bar cover
Unfold the chassis.
Check that the chassis locks function on both sides.
Check that the safety catch/safety buttons function correctly by folding the pram and
checking that the safety catch/safety buttons are activated to prevent accidental folding.
Check that the seat unit/carrycot clicks securely on to the chassis and that it locks on
both sides.
Check the harness function on the seat unit by locking and unlocking the harness.
Check the handle height adjustment function by adjusting the handle up and down.
The handle should lock securely into each position.
Check the carrycot/seat unit’s angle adjustment’s 3 positions on both sides of the
chassis.
Check that the backrest can be adjusted and locks securely into each of its four
positions.
Check that the footrest can be adjusted and locks securely into each of its two
positions.
Lubricate the ends of the axles.
Attach the wheels and make sure that the wheels lock into position.
Check that the parking device locks both rear wheels when engaged.
UK
To Next Page
Loading...
