Emmaljunga Nitro City - Chassis Assembly and Usage; Unfolding Chassis and Attaching Wheels; Attaching the Seat-Unit

English
1
2
4
31
Manual Nitro City v. 1.8
1
2
3
4
3
Attaching the wheels
• Release the brake by pushing the brake bar up towards you using
minimum force with your foot.
• Remove the plastic protection from the axles. Save them for future
use.
• Attach the wheels with the wheel cogs (1). Press in the hub cap’s
release button (2), push the wheel onto the axle as far as it can go.
Release the button and pull the wheel towards you, until you hear
a denite click. Repeat the same procedure for all four wheels.
Please make sure that the wheels are attached properly and cannot
be pulled off the axle.
IMPORTANT
• The wheels are greased and can leave marks on textiles. Please
use wheel protection indoors to protect your oors.
• Risk of suffocation. Don’t let your child play with or in some other
way handle the plastic protectors.
Assembly and usage of the chassis
Make sure children are clear of any moving parts if you adjust the
stroller, otherwise they may be injured.
Unfolding the chassis
• Apply the brake on the pram.
• Raise the handle, while you are holding the side of the chassis,
until the chassis locks click into the locked position on both sides of
the pram.
WARNING
• The chassis locks need to click into the locked position.
• The safety catch (secondary locking mechanism) is activated to
prevent unintentional folding if the chassis lock is not locked into
position.
• Please make sure, before you use the pram that the chassis lock is
in the locked position.
Attachment of the seat-unit.
• Engage the parking device: Lift the seat-unit by the handles and
push the Easy Fix pieces into the attachments on both sides of the
chassis (4) until it locks into position.
• To release the seat-unit: Start by engaging the parking device.
Press the Easy-x grip (3) and then lift the seat-unit straight up.
• The seat-unit can be attached in both driving directions
WARNING
• Don’t let any child be placed in the vehicle when it is being folded/
unfolded
• Hold the handles steadily until the seat unit is in place.
IMPORTANT
• Make sure that the seat-unit is in place, before you start to use the
vehicle.
• Never lift the top part when it is assembled onto the chassis
WARNING
• Never pull a pram with swivel front wheels behind you, if the front
wheels are not locked. The pram might self turn which can lead to a
safety risk if you are not cautious and attentive.