EasyManua.ls Logo

Emmaljunga SENTO PRO ERGO - Adjustable Suspension; Assembly of the Basket; Assembly of the Carrycot; Attach;Remove the Carrycot

Emmaljunga SENTO PRO ERGO
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
37
SE
SE
2-5
PL
28-29
2-5
LV
26-27
2-5
LT
24-25
2-5
ES
22-23
2-5
EE
20-21
2-5
CZ
18-19
2-10
NO
103-119
2-10
FI
85-102
2-10
DK
67-84
2-10
DE
47-66
2-10
EN
29-46
2-10
SE
11-28
SE
2-10
PL
210-228
2-10
LV
192-209
2-10
LT
174-191
2-10
ES
155-173
2-10
EE
137-154
2-10
CZ
120-136
Solo, Sento, Sento PRO V 1.1
8) Assembly of the basket
Assemble the basket according to the
pictures.
Carrycot
1) Assembly of the carrycot
1. To erect the carrycot pull the bar using
the easy pull handle along the bottom
of the carrycot towards the plastic
stops. Repeat both in the foot end and
the head end. *Assemble the inner
fabric with the zipper
WARNING
Make sure the metal bars are rmly
attached to the carrycot frame before the
carrycot is erected. If the metal bars are
not in place, the fabric may be damaged.
2. Remove the mattress from the plastic
bag (discard safely). Place the mattress.
WARNING
Do not use a additional mattresses
in the carrycot. Only use the
Emmaljunga original mattress that
comes with the pram.
Risk of suffocation. Do not let children
play with plastic bags.
3. Press both buttons on the inside of the
hood and pull it up. Attach the apron
using the velcro straps on each side of
the carrycot. The hood can be folded
up and down in the desired position by
pressing both buttons on the inside of
the hood.
4. The hood is attached to the carrycot
with velcro strips.
5. To ad ventilation open the zipper and
roll the fabric upwards.
2) Attach/remove the carrycot
1. Engage the brake. Lift the carrycot
with the handle and place it onto the
chassis. Press the carrycot downwards
until it locks into place, you will hear a
“click” on both sides. Make sure the
indicator is completely green.
WARNING
Always check that the carrycot is
properly attached in the locked
position on both sides.
2. Engage the brake. Under the carrycot
base, push the button and pull the
handle towards you. Lift the carrycot
upwards.
WARNING
3. Never use the carrycot in the
position with the hood placed towards
the handlebar.
The hood on the carrycot should
always be placed away from the
handlebar
WARNING
4. Always use the carrycot lifting
handle as illustrated. This is very
important!
Never leave the carrycot near the
stairs, on the top of a table or in
places where it can fall off.
Do not use the carrycot as a cradle
outdoors or on uneven surfaces.
Do not use the carrycot as a bed for
your child.
4. Never lift the carrycot with the
lifting handle as illustrated. This is very
important!
3) Insect net
1. Attach the Insect net using the zip on
the edge of the hood.
2. To secure the insect net fasten the
press stud to the inside of the hood.
Repeat on the other side.
4) Folding the carrycot
Remove the mattress.Pull the bar using
the easy pull handle along the bottom of
the carrycot. Repeat both in the foot end
and the head end.

Table of Contents

Related product manuals