Emmaljunga SENTO PRO ERGO - Adjust the Backrest; Footrest; Adjust the Hood; Assembly of the Seat Unit; Attach;Remove the Seat Unit

39
SE
SE
2-5
PL
28-29
2-5
LV
26-27
2-5
LT
24-25
2-5
ES
22-23
2-5
EE
20-21
2-5
CZ
18-19
2-10
NO
103-119
2-10
FI
85-102
2-10
DK
67-84
2-10
DE
47-66
2-10
EN
29-46
2-10
SE
11-28
SE
2-10
PL
210-228
2-10
LV
192-209
2-10
LT
174-191
2-10
ES
155-173
2-10
EE
137-154
2-10
CZ
120-136
Solo, Sento, Sento PRO V 1.1
unit.
3) Adjust the hood
ERGO
1. Pull the hood gently forward or
backward to the desired position.
2. To extend the hood to protect the child
from weather you can open the zip on
the hood. Pull the hood forward and
the hood extends.
3. Open the zipper to add more
ventilation.
FLAT
1. Pull the hood gently forward or
backward to the desired position.
2. Open the zipper to add more
ventilation.
WARNING
• Ensure that children are kept away
from all moving parts of the pram to
avoid risk of injury.
4) Open/close the bumper bar
1. Unfasten the crotch strap. Press the
button on the inside of the bumper bar
to open.
2. Press the bumper bar into the bracket
until you hear a ”click”.
WARNING
• The bumper bar should always be
tted when using the seat unit.
• Always check that the bumper bar
is correctly attached to the seat unit
before use.
• Fasten the crotch strap around the
bumper bar.
• Never carry the seat unit/stroller by
the bumper bar.
5) Adjust the backrest/ footrest
ERGO
1. The back rest can be adjusted into
different positions. Pull the handle at
the back of the seat unit upwards and
adjust to the desired position.
2. Press both of the buttons on each side
of the frame to adjust the footrest.
Note: Maximum weight on the footrest
is 3kg.
FLAT
1. The backrest angle is adjustable. Pull
the grey handle upwards and adjust the
backrest angle carefully by pushing the
backrest forward or backward.
2. Pull the grey handle on the side of the
footrest to adjust it. Note: Maximum
weight on the footrest is 3kg.
WARNING
• Ensure that children are kept away
from all moving parts of the pram to
avoid risk of injury.
• Always check that the seat unit is in
one of the positions by pushing it
back until it locks into place.
• Never let the child/children stand on
the footrest.
6) Removal of the seat unit fabric
ERGO
1. Open the press studs on the hood,
remove the hood from the seat frame.
2. Open the press studs and buckles on
each side.
3. Open the fabric under the seat, remove
the fabric from the seat plate.
4. Thread all seat belts through the holes.
5. Remove the push button around the
folding handle and remove the fabric
from the seat frame.
FLAT
1. Press the buttons on both sides of the
hood and remove the hood from the
seat unit.
2. Open the press studs on the seat unit
and on the footrest.
3 Thread the harness straps through the
holes in the fabric.
4 Thread the crotch strap from the fabric
and remove the fabric from the seat