EMMO E-mini B - Meter Operation (S900 LCD); S900 LCD Screen Overview; Display Settings Configuration; Advanced Display Settings

15
MeterProgramming&Use
S900 LCD
1) Speed ：Average SPEED/MAX SPEED
2) Speed unit ：Kmh/MPH
3) Battery level: 5 levels, voltage interval could be customized
4) Head light icon ： indicates when head light and back light are on
5) Error code ： “ERROR” and code when there is error
6) Assist level ：actual assist level 0~5, 0 –no assist, 1- ECO, 2,3-STD，
4,5-POWER)
7) Distance ：Trip/ODO
8) 6km mode
To turn the unit on, press and hold the “M” button to start the display. Long press
again “M” will switch it off. The display switches off automatically if there is no
activity for ten minutes (default).
Display setting:
 Short press M button to switch ODO/Trip.
 Short press up or down button to change assist level, default value is level 1
 Long press up button for 3 seconds turn on/off the head light when application
 Long press down button to enter/quit walking mode, “walk” will show up on
screen
Advanced setting
Hold the up and down button for seconds to enter the setup interface, short press up
or down button to change the value, short press M button to save current value and
switch to next parameter.
 Backlight-P01, press up or down button to change the brightness (range is 1 to 3)
 Speed unit-P02, press up or down button to change between MPH and KMH.
 Voltage-P03, press up or down button to change the voltage 24v/36v/48v.Please
don’t change the default value.