Pedals and tire pressure
Pedal Installation and Adjustment:
Take out pedals from the accessory box, install one of the pedals (pedals are marked with the letters "L" and "R" to indicate the side they
belong to). When installing the pedals, insert the wrench stuck on the flat end of pedal axial head, and twist into the crank in
clockwise direction.
Tire pressure
Keep proper air pressure, the space between tire and ground contact is about 4 inches long when riding on the electric bicycle.
Inflate your tires to a maximum of 20 psi (140 kPa).
Ridding on low-pressure tires will affect your range and will lead to premature wear and tear of the tires.
Always check your tires before riding and make sure they are properly inflated.
18
To Next Page
Loading...
