Operation stages
Warning:
"For your safety, please practice in a closed track the first time you ride your ebike". After mastering the controls of an electric bicycle,
you may ride on regular roads and follow the traffic rules consciously. Do not let inexperienced people ride the electric bicycle,
do not disassemble and refit the electric bicycle. please pay attention and brake in advance to allow longer braking distance in rainy
or snowy weather.
Start: Press and hold the M button on the left handlebar controls.
!
Motor On/Pedal Assist:!
Start pedaling and the electric bicycle will drive forward normally.
If you stop pedaling, the electric motor will stop working, but it will still
drive forward a short distance because of inertia.
You can adjust the level of electric assistance by toggling the up and
down arrows. There are 5 levels of electrical assistance, level 5 being
the highest.
Throttle only
You can use the thumb throttle only and the bicycle will move without you having to pedal. Click the M button on the handlebar control to
turn on the system, with your right wrist pull down the throttle, the further you push the throttle the faster it accelerates.
Note: A: For your safety concern, please hold the grip tightly with both hands while riding, and please brake in a timely manner when
necessary.
B: This bicycle has the function of brake power cut. The brakes will cut off the motor power to ensure safety of riding.
Always check your brakes and cables before riding.
7
To Next Page
Loading...
