Product Overview
The information contained in this manual is updated periodically. While great care is taken in compiling the information contained in this manual, Engineered
Machined Products, Inc. cannot assume liability for losses of any nature arising from any errors and/or omissions.
The information and specifications contained throughout this manual are up to date at the time of publication. Engineered Machined Products, Inc. reserves
the right to change the content of this manual at any time without notice.
© 2020, EMP Inc. 2
Engineered Machined Products, Inc.
2701 North 30
th
Street
Escanaba, MI, USA 49829
Phone: +1 (906) 789-7497
www.emp-corp.com
Service@emp-corp.com
Product Overview
The EMP OP product line are electrically powered fluid pumps available in 12V DC and 24V DC configurations.
Proper installation of the pump will help ensure the performance and reliability of the electric pump while reducing
the risk of damage to other components in the system.
CAUTION: Do not use these pumps for transferring any fluids other than those for which they were
designed; to do so may damage the pump and will void the warranty.
To Next Page
Loading...
