INSTA L L AT I O N P R O C E D U R E S
SAFETY WARNING
HOOD MAY HAVE VERY SHARP EDGES; PLEASE WEAR
PROTECTIVE GLOVES IF IT IS NECESSARY TO REMOVE
ANY PARTS FOR INSTALLING, CLEANING OR SERVICING.
Vent pipe
Air outlet
Step 1:
Put the vent pipe to the air outlet like
this picture. And use one ST3.9x10
screw to fix the vent pipe.
Step 2:
Matching the hook to the holes of
the inner duct cover and fix it well
with M4 screws.
Step 3:
Insert the inner duct cover into the
outer duct cover.
Step 4:
Matching the holes of the outer duct
cover and blower box, fix the outer
duct cover to the blower box using
8pcs M4*10 screw provided with the
fixing tool as the direction of the
illustrated.
To Next Page
Loading...
