Using Boost function
For EMPV-IDC24 EMPV-IDC30 EMPV-IDC36 Only
Activate the boost function
1. Select the zone with boost function (front left zone).
2. Touching until power level indication shows “P”.
Cancel Boost function
1. Select the zone with boost function (front left zone).
2. Touching the “slider” to cancel the Boost function, and select the level you want to
set.
OR
• Boost function can only last for 5 minutes, after that the zone will go to level 9
automatically.
Using the Keep Warm function
For EMPV-IDC30 EMPV-IDC36 Only
Activate the Keep Warm function
1. Select the zone with the keep warm function (front left zone).
2. Touching the keep warm control, the zone indication shows “
|
”
To Next Page
Loading...
Need help?
General
