Using the Timer
You can use the timer in two different ways:
• You can use it as a minute minder. In this case, the timer will not turn any cooking
zone off when the set time is up.
• You can use it as cut-off timer to turn one or more cooking zones off after time is
up.
* You can set the timer up to 99 minutes.
Using the Timer as a Minute Minder
1. Make sure the cooktop is turned on. And zone slection key is not activated (zone
indication ‘-‘is not blinking).
Note: you can set minute minder before or after cooking zone power setting finished.
2. Touch timer key, “00” will show in the timer display
and “0” will blink.
3. Set the time by touching the”-”” +”or touching the
“slider” control of the timer (e.g. 5)
OR
4. Touch timer control again, then “0” will flash.
5. Set the time by touching the “-“ “+” or touching the “slider”, now the timer you set
is 95 minutes.
OR
To Next Page
Loading...
Need help?
General
