EMPHASER EA2160S User Manual

25
6. TECHNICAL SPECIFICATIONS/TECHNISCHE SPEZIFIKATIONEN
EA2160s
EA2260s
EA4160s
2-CHANNEL AMPLIFIER 2-KANAL VERSTÄRKER
160W x 2 @ 4 ohms (< 1.0% THD / 13.8V) 160W x 2 @ 4 Ohm (< 1.0% THD / 13.8V)
260W x 2 @ 2 ohms (< 1.0% THD / 13.8V) 260W x 2 @ 2 Ohm (< 1.0% THD / 13.8V)
510W x 1 @ 4 ohms (< 1.0% THD / 13.8V) 510W x 1 @ 4 Ohm (< 1.0% THD / 13.8V)
2 ohms stable / 4 ohms stable in bridged mode 2 Ohm stabil / 4 Ohm stabil gebrückt
Integrated variable highpass filter: 10 - 300Hz with 12dB/oct. Integriertes variables Hochpassfilter: 10 - 300Hz mit 12dB/
Integrated variable lowpass filter: 30 - 300Hz with 24dB/oct. Integriertes variables Tiefpassfilter: 30 - 300Hz mit 24dB/Okt.
Variable input sensitivity: 0.3 - 7V Variable Eingangsempfindlichkeit: 0.3 - 7V
Damping factor @ 4 ohms: > 350 Dämpfungsfaktor an 4 Ohm: > 350
Signal to noise ratio: > 85dB Signal-Rauschabstand: > 85dB
Remote low pass level remote control Externe Basspegel-Fernbedienung
20mm² direct power input terminals 20mm² Strom-Anschluss Terminals
Dimensions WxHxD: 430 x 78 x 255mm Dimensionen BxHxT: 430 x 78 x 255mm
4-CHANNEL AMPLIFIER 4-KANAL VERSTÄRKER
160W x 4 @ 4 ohms (< 1.0% THD / 13.8V) 160W x 4 @ 4 Ohm (< 1.0% THD / 13.8V)
220W x 4 @ 2 ohms (< 1.0% THD / 13.8V) 220W x 4 @ 2 Ohm (< 1.0% THD / 13.8V)
440W x 2 @ 4 ohms (< 1.0% THD / 13.8V) 440W x 2 @ 4 Ohm (< 1.0% THD / 13.8V)
2 ohms stable / 4 ohms stable in bridged mode 2 Ohm stabil / 4 Ohm stabil gebrückt
Integrated variable highpass filter: 10 - 300Hz with 12dB/oct. Integriertes variables Hochpassfilter: 10 - 300Hz mit 12dB/Okt.
Integrated variable lowpass filter: 30 - 300Hz with 24dB/oct. Integriertes variables Tiefpassfilter: 30 - 300Hz mit 24dB/Okt.
Variable input sensitivity: 0.3 - 7V Variable Eingangsempfindlichkeit: 0.3 - 7V
Damping factor @ 4 ohms: > 250 Dämpfungsfaktor an 4 Ohm: > 250
Signal to noise ratio: > 85dB Signal-Rauschabstand: > 85dB
20mm² direct power input terminals 20mm² Strom-Anschluss Terminals
Dimensions WxHxD: 555 x 78 x 255mm Dimensionen BxHxT: 555 x 78 x 255mm
2-CHANNEL AMPLIFIER 2-KANAL VERSTÄRKER
280W x 2 @ 4 ohms (< 1.0% THD / 13.8V) 280W x 2 @ 4 Ohm (< 1.0% THD / 13.8V)
460W x 2 @ 2 ohms (< 1.0% THD / 13.8V) 460W x 2 @ 2 Ohm (< 1.0% THD / 13.8V)
620W x 2 @ 1 ohms (< 1.0% THD / 13.8V) 620W x 2 @ 1 Ohm (< 1.0% THD / 13.8V)
930W x 1 @ 4 ohms (< 1.0% THD / 13.8V) 930W x 1 @ 4 Ohm (< 1.0% THD / 13.8V)
1250W x 1 @ 2 ohms (< 1.0% THD / 13.8V) 1250W x 1 @ 2 Ohm (< 1.0% THD / 13.8V)
1 ohms stable / 2 ohms stable in bridged mode 1 Ohm stabil / 2 Ohm stabil gebrückt
Integrated variable highpass filter: 10 - 300Hz with 12dB/oct. Integriertes variables Hochpassfilter: 10 - 300Hz mit 12dB/Okt.
Integrated variable lowpass filter: 30 - 300Hz with 24dB/oct. Integriertes variables Tiefpassfilter: 30 - 300Hz mit 24dB/Okt.
Variable input sensitivity: 0.3 - 7V Variable Eingangsempfindlichkeit: 0.3 - 7V
Damping factor @ 4 ohms: > 250 Dämpfungsfaktor an 4 Ohm: > 250
Signal to noise ratio: > 85dB Signal-Rauschabstand: > 85dB
Remote low pass level remote control Externe Basspegel-Fernbedienung
50mm² direct power input terminals 50mm² Strom-Anschluss Terminals
Dimensions WxHxD: 590 x 78 x 255mm Dimensionen BxHxT: 590 x 78 x 255mm
EA 2-4-5 CH Manual (EDF)_2008.indd 25 25.02.2008 17:29:54 Uhr

EMPHASER EA2160S Specifications

General

Brand	EMPHASER
Model	EA2160S
Category	Amplifier
Language	English