EMPHASER EA2190 - Specifications

14
Rated Power Output
ster
eo at 4 Ohms (13.8 V)
(THD = 1 %)
Rated Power Output
ster
eo at 2 Ohms (13.8 V)
(THD < = 0,1 %)
Rated Power Output
bridged
at 4 Ohms (13.8 V)
(THD < = 0,1 %)
Rated Power Output
bridged
at 2 Ohms (13.8 V)
(THD < = 0,1 %)
Damping Factor
at 4 Ohms
Signal-to-Noise Ratio
(A-Filter)
Frequency Response
(+0 dB / -1 dB)
Channel Separation
Input Sensitivity
Integrated Cross-Over/Filtering
Slope Rate
Cross-Over Frequency
Fuse
2 x 190 W
2 x 290 W
1 x 600 W
fuse will blow
200
< 90 dB
10 Hz - 40 kHz
< 55 dB
150 mV - 3 V
HPF/LPF
12 dB/oct.
continuously adj. 50 -250 Hz
2 x 30 A
EA2190
4 x 90 W
4 x 120 W
2 x 240 W
fuse will blow
200
< 90 dB
10 Hz - 40 kHz
< 55 dB
150 mV - 3 V
HPF/LPF
12 dB/oct.
continuously adj. 50 -250 Hz
2 x 30 A
EA490
SPECIFICATIONS
EA2190490 Manual neu 31.07.2000 19:02 Uhr Seite 14