1. DESIGN FEATURES
■ CAR AUDIO AMPLIFIER: This EMPHASER amplifier allows the crossover controlled amplification
of satellite speaker systems, kickwoofers and subwoofer systems
■ INTEGRATED ELECTRONIC CROSSOVER: The internal crossover section features indepen-
dently selectable highpass or bandpass filtering, as well as fulllrange loop through. All x-overs feature
crossover slope rates of 12/24 dB/octave for high- and low-pass sections.
■ UNCOMPROMISING DESIGN AND CONSTRUCTION: Only best electronic parts and
components have been used for the assembly of this amplifier line. Such as double-sided glass-fiber
epoxy circuit boards equipped with high current TR output devices.
■ ADVANCED PROTECTION CIRCUITRY: The protection circuitry safe-guards the amplifier
from short-circuits at the speaker outputs, DC offset voltage at the outputs and overheating of power
electronics
■ STATUS AND PROTECTION LED’S: A green and a red LED located at the side panel enable
you to monitor the operating status of your EMPHASER amp
■ ADJUSTABLE INPUT SENSITIVITY: Each RCA line-input pair accepts input voltages from
300mV to 7V, providing a good match to the line-output levels of almost any head-unit on the mar-
ket
To Next Page
Loading...
Need help?
General
