Empisal 760C - Needle Threading

12
NEEDLE THREADING
5. Turn the hand wheel toward you until
needles are fully raised.
6. Pass the right and left needle threads as
illustrated.
Important: The thread must lie correctly
between the two discs inside the tension
dials.
Pass through the needle eyes from front to
back as illustrated.
7. Pull out the thread end about 10 cm (4") long
from the needle eyes. Raise the presser foot
and place threads under it, then lower the
presser foot.
Left needle thread Right needle thread
○
3
○
2
2
○
1
1
3
○
4
○
5
○
8
○
4
○
9
○
3
○
7
○
2
8
5
2
3
4
6
7
6
○
6
○
8
○
4
○
9
8
7
○
6
5
4
6
○
4
○
7
○
5
Thread between two discs