Interferential 2-pole Set-up
Interferential 2-pole therapy (IFT2) is similar to Interferential 4-pole except
that the two medium frequencies are added together in the stimulator itself
to produce a beat frequency (equal to the difference in frequencies as
defined by the AMF settings) – this is then applied to the treatment site
through a single pair of electrodes.
The Interferential 2-pole set up is similar to that of the 4-pole. The treatment
time, carrier frequency, base and peak frequencies, pattern and constant
current/voltage operation are adjusted in exactly the same way. ‘Vector’ is
not available in 2-pole.
To Next Page
Loading...
