Medi-Wave
The Medi-Wave output is a train of differentiated pulses with a pulse width of
6 ms. In burst mode the burst rate is 2 Hz for pulse frequencies greater than
20 Hz and the pulse frequency divided by 10 for frequencies less than 20
Hz. The duty cycle of the burst is 50%. In surge mode the surge rate is 10
per minute.
Microcurrent
The Microcurrent output is a unipolar square wave with a frequency variable
between 0 and 1000 Hz. It is a small constant current, variable between 0
and 1mA, and its polarity may be selected as Pos (+), Neg (-), or autorev
(half way through the treatment time)
S/D curve
The S/D curve mode generates rectangular interrupted galvanic pulses for
plotting strength/duration curves. Only channel A is energised in this mode
and the peak output voltage is 140V.
To Next Page
Loading...
