User Programs
The Interferential 960/Multidyne 970 can store up to 16 user defined set-
ups. Touch the ‘User Programs’ button in the ‘Home’ screen or in any
stimulation set up screen.
A screen will appear with a scrollable list of program slots – the active one
is highlighted in the middle. Touching ‘Save’ will store the settings from the
last open set up screen to this slot – if the slot isn’t empty a pop-up window
will appear asking you to confirm or cancel the save process (to prevent
unintentional over-writing of a previously saved program).
To recall a program simply touch its program slot button and a set up
screen will open showing the previously stored parameters.
The ‘Notes’ button in any user program set-up screen opens a qwerty style
keypad that allows you to save memo information about the program – the
first 30 characters recorded will be displayed as the title of that user
program.
To Next Page
Loading...
