8.2 Fire (Networked Device):
When a device on a Networked Control Panel has activated a Fire Alarm, the following
alarm screen will be shown: -
The above display shows that a Fire Alarm has been generated from Device 27, in Zone
1 on Panel 4.
8.25 Pre-Alarm:
When a Pre-Alarm event occurs the text on the display changes to show: -
The above display shows that Device 27 has entered a Pre-Alarm event, in Zone 3.
8.3 Tamper:
When a device generates a Tamper Alarm, the display will change to show: -
The above shows that Device 5 has generated a Tamper Alarm in Zone 1.
8.35 Fault Event:
When a Fault Event occurs the text on the display changes to show: -
01 FAULT TOT 01
RS SECOND FLOOR
MAIN CORRIDOR
ZONE 04 DEVICE 056
01 FIRE ALARM TOT 01
To Next Page
Loading...