EMS iris+ - Deleting a Transmitter

Page 20 of 32
Deleting a transmitter
To delete a transmitter, access the Main Menu by following the operations listed under the
previous ‘Accessing the engineering menus’ section.
Now, follow the steps listed below:
Press the  button four times. The screen will now
display:
Press the  button. The screen will change to display:
Press the  button seven times. The screen will change
to display:
Press the  button. The screen will change to display:
Press the button once. The screen will change to
display:
Press the  button. The screen will change to display:
Enter the transmitter number to be deleted and the
screen will change to (screen shown for Handpush 001):
Press 1 (one) to accept and the screen will change to:
Press any key and you will return to the delete transmitter
menu.
| Time and Date |
> Radio Setup <
| Output Setup |
2 = Help 13: 51
1
| ** Radio Setup ** |
> Add Transmitter <
| Txer Details |
2 = Help 13: 51
| Reinstate Transmitter |
| Test Routines |
> Delete Transmitter <
2 = Help 13: 51
1
| Delete Transmitter |
> Delete by Number <
| Delete by Tx |
2=Help 13: 51
> Delete Transmitter <
| Delete by Number |
| Delete by Tx |
2=Help 13: 51
1
Enter Transmitter
Number: _
= Done  = Del 13: 52
Hand Push 001
Delete ?
1=Yes 0=No 13: 52
Hand Push 001
Deleted
Press Any Key 13: 52
Repeat the above steps for any further transmitters to be deleted, or press the button three times
to escape to the main menu.
3