EMS iris+ Installation Guide

Appendix
Product number
7500 variants
7910
7920
7920/AS
7920/PB
7920/PC
7930
7943
7970
7971
7972
Description
Portable transmitter
Moneyclip
Contact operated transmitter
Air switch operated transmitter
Push button operated transmitter
Pull cord operated transmitter
Asset protection transmitter
High power transmitter
Pendant transmitter with chain
Pendant transmitter without chain
Pendant transmitter with lanyard
Options
Opposed action
Non opposed
Triple action
Single action
Dual action
Single action
Dual action
Alarm N/O
Alarm N/C
Local N/O
Local N/C
Single action
Single action
Single action
Single action
Alarm N/O
Dual action
Single action
Opposed action
Glossary
*
Aerial Tamper
Call In Fail
I
P
R.F.I
System Clear
System Reset
Test All TX
*Carrier received (precedes time on display)
Aerial has been removed or tampered with Call In Fail Transmitter failed to
call in three successive times (precedes Txer Details)
Transmitter has failed to call in a rst or second time (log event only)
RFI Detected after a period of 30 seconds (precedes time on display)
12Vdc PSU below
10.2Vdc, +/- 0.3Vdc threshold (precedes time on display)
Radio Frequency Interference.
System now armed.
System resetting outstanding events.
Test full alarm, local and tamper (where applicable) for each transmitter
programmed to the system.
Page 29 of 32

EMS iris+ Specifications

General

Brand	EMS
Model	iris+
Category	Security System
Language	English