EMTEST BS 200N100 - Standards Covered by BS 200 N100; Maximum Applicable DC Voltage Supply

AMETEK CTS BS 200N100
Operating manual V 1.12 4 / 21
1.
Standards covered by BS 200N100
With the BS 200N100 the user covers the following standards for conducted emission transients:
- ISO 7637-2 Ed3 (2011-03)
Road vehicles; Electrical disturbances by conduction and
coupling ;
Part 2 : Electrical transients conduction along supply lines only
- several standards
In accordance with ISO 7637 Part 2
- LV 124
Elektrische und elektronische Komponenten in Kraftfahrzeugen
bis 3,5t
- Allgemeine Anforderungen, Prüfbedingungen und Prüfungen
1.1.
Maximum applicable dc voltage supply
The maximum applicable DUT dc voltage supply for the BS 200N100 is 60V
DC
Higher dc voltages will damage the equipment.