How to fix an EMtronics EMAFDD9LAQ that won't turn on?
If your EMtronics Fryer isn't working, there are a couple of things to check: * First, make sure the appliance is plugged into an earthed wall socket. * Second, ensure you've set the timer by turning the timer knob to the required preparation time to switch on the appliance.
How to make fresh fries crispier in my EMtronics Fryer?
If your fresh potato fries aren't crispy when they come out of the EMtronics Fryer, it's likely due to the amount of oil and water in the fries. Ensure you dry the potato sticks properly before coating them with oil. You can also cut the potato into thinner sticks or add slightly more oil for a crispier result.
What to do if fried snacks are not crispy in my EMtronics EMAFDD9LAQ Fryer?
If fried snacks aren't crispy after using your EMtronics Fryer, it might be because you're using snacks meant for a traditional deep fryer. Try using oven snacks instead, or lightly brush some oil onto the snacks before frying for a crispier result.
Why are my fresh fries cooking unevenly in my EMtronics EMAFDD9LAQ?
If your fresh potato fries are fried unevenly in the EMtronics Fryer, it could be due to a couple of reasons. You may not have soaked the potato sticks properly before frying; soak them in a bowl of water for at least 30 minutes, then take them out and dry them with kitchen paper. Also, ensure you're using the right potato type – fresh potatoes that stay firm during frying are best.
To Next Page
General
