EMX CR-2000 - Product Overview and Controls; Product Features; Operation State Indicators

CR-2000 Instructions Rev 1.5 2
Date 6/28/2018
Product Overview
The CR-2000 is an inductive contact-less card reader in a metal water proof housing that also acts as a
keypad control. The CR-2000 provides safe secure access control for any combination of 2000 users by
the use of the Mifare pass card or individual user pass codes.
The CR-2000 has low power consumption (30mA standby) luminous keypad for nighttime use, Short
circuit protection, tamper alarm output, and the Wiegand output for monitoring of user access.
The CR-2000 may also be used stand alone for access control of doors, gate and barrier arms.
Features
 Low 30 mA standby current
 Luminous keypad: for nighttime operation
 2000 user support
 Independent password support (may use code or card for access)
 Keypad user delete (for lost or stolen cards or codes)
 Output short circuit protection
 Wiegand output: Wg26 for cards
 Tamper alarm output
 Doorbell button: Independent from circuit works with any doorbell
 User pass card code change (allows user to use code they can remember in case card is lost or
forgotten)
Indicators and Controls
Operation State
Red LED
Green LED
Beeper
Notes
Standby
Slow Blink
Off
Key Activation
Beep
Success
Off
On
Long Beep
Fail
3 Short Beeps
Enter Programming
On
Off
Long Beep
Indicator is Orange
Set Condition
On
On
Exit Programming
Slow Blink
Off
Long Beep
Unlock
Off
On
Long Beep
Alarm
Fast Blink
Off
Alarm Sound