I - Introduction
Congratulations on your purchase of ENHWI-N3 802.11n Wireless Router.
ENHWI-N3 is backward compatible with wireless devices running under the
802.11g and 802.11b technologies. ENHWI-N3 is not only a Wireless Access
Point, but also a wireless Repeater that extends your wireless coverage when
used as a Repeater Mode in a established Local Area Networking or LAN, as
well as 4-port 10/100 Mbps full-duplex Switch that connects your wired Ethernet
LAN devices together at incredible speed.
At 150 Mbps wireless transmission rate, the Access Point built into the router
uses advanced MIMO (Multi-Input, Multi-Output) technology to transmit multiple
streams of data into a single wireless channel providing a seamless access to
multimedia contents. Its robust RF signal travels farther, eliminates dead spots
and extends network range. For data protection, wireless security and privacy,
the ENHWI-N3 encodes all wireless transmissions with WEP, WPA, and WPA2
data encryptions.
With built-in DHCP Server & a powerful SPI firewall, the ENHWI-N3 protects
your computers against intruders and known Internet attacks, and still provides
safe and secured VPN pass-through. With data rate at incredible speed and QoS
function, the ENHWI-N3 is ideal for media-centric applications such as streaming
video, internet gaming, and VoIP telephony to run multiple media-intense data
streams through the network at the same time, with no degradation in
performance.
3
To Next Page
Loading...
Need help?
General
