Encore ENHWI-N3 User Manual

ENHWI-N3
802.11n Wireless Router
User Manual
1

Encore ENHWI-N3 Specifications

General

Wireless Standards	IEEE 802.11b/g/n
Frequency Band	2.4 GHz
Maximum Data Rate	150 Mbps
Antenna Type	External
Antennas	2
Security	WEP, WPA, WPA2
Weight	220 g
Ethernet Ports	4 x 10/100M LAN, 1 x 10/100M WAN

Summary

Introduction and Overview

Key Features and Package Contents

Overview of product features and included items.

Product Layout

Identification of front and rear panel components and LEDs.

Network and System Requirements

Minimum requirements for PC, OS, and network connections.

Initial Setup and Configuration

Connecting LAN/WAN and PC Setup

Instructions for physically connecting the router to the network and PC.

Power Up, Smart Wizard, and Web Access

Steps to power on the router, use the setup wizard, and access the web interface.

AP Router Mode Configuration

System, WAN, LAN, and Internet Settings

Configure system info, WAN/LAN ports, and internet connection types (DHCP, Static, PPPoE).

Wireless and Security Settings

Set up wireless network (SSID, Band) and security (WEP, WPA, MAC filtering).

Firewall and Advanced Features

Configure firewall, DMZ, DoS, IP/URL filtering, NAT, and port forwarding.

Router Tools and Maintenance

Manage admin password, time, DDNS, firmware, backup, and reset router.

Repeater Mode Configuration

Repeater Mode Overview and Wireless Setup

Monitor repeater status, configure wireless settings, and site survey.

Repeater Mode Tools and Maintenance

Admin, time, diagnosis, firmware, backup, and reset functions for Repeater mode.

Regulatory Compliance

FCC and IC Interference Statements

Statements regarding FCC and IC compliance for radio frequency interference.