To Next PageTo Next Page
Need help?Do you have a question about the Encore N150 and is the answer not in the manual?
General| Ethernet LAN | Yes |
|---|---|
| Networking standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3u |
| Receiver sensitivity | IEEE802.11n - MCS0@ -91dBm, MCS7@ -74dBm IEEE802.11g - 6Mbps@ -90dBm, 54Mbps@ -70dBm IEEE802.11b - 1Mbps@ -90dBm, 11Mbps@ -87dBm |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Ethernet LAN interface type | Fast Ethernet |
| Interface | RJ-45, USB |
| Indoor range | 100m |
| Outdoor range | 300m |
| Frequency range | 2.400 - 2.484 GHz |
| Power supply type | DC |
| Dimensions (WxDxH) | 97 x 128 x 25 mm |
| Power requirements | 12V |
| USB ports quantity | 0 |
| WLAN data transfer rates supported | 157.5 Mbit/s |
| Non-operating relative humidity (non-condensing) | 15 - 95 % |
| Channels quantity | 13 channels |
| Media access protocol | CSMA/CA, ACK |
| Supported network protocols | TCP/IP, PPPoE/PPTP/L2TP, HTTP |
| Security algorithms | 128-bit WEP, 64-bit WEP, WPA, WPA-PSK, WPA2, WPA2-PSK |
| Antennas quantity | 1 |
| Antenna gain level (max) | 2 dBi |
| Ethernet LAN (RJ-45) ports | 4 |
| Certification | FCC, CE, RoHS |
| Storage temperature (T-T) | -10 - 70 °C |
| Operating temperature (T-T) | 0 - 45 °C |
Weight and Dimensions| Weight | - g |
|---|
Overview of the router's capabilities and features.
Lists the primary functionalities and advantages of the router.
Details all items included in the product packaging.
Describes the physical layout and components of the router.
Lists the minimum system prerequisites for setup.
Instructions for physically mounting the router on a wall.
Guidance on optimal placement for router performance.
Steps to connect LAN and 3G (WAN) interfaces.
Configuration steps for the client PC's network adapter.
Procedure for powering on the router.
Step-by-step guidance for initial router configuration using the wizard.
Instructions for accessing the router's web interface for the first time.
Detailed steps to log into the router's web-based management interface.
Displays router's operational status, hardware, and firmware information.
Manages the router's Local Area Network (LAN) settings.
Configures the Dynamic Host Configuration Protocol server for IP allocation.
Allows setting up scheduled functions for firewall or power saving.
Displays system operation logs and events.
Shows bandwidth monitoring for network interfaces.
Selects the preferred user interface language.
Guides through basic configuration in AP Router mode.
Configures various internet connection types.
Configures internet connection using Dynamic IP.
Configures internet connection using Static IP.
Configures internet connection using PPPoE protocol.
Configures internet connection using PPTP protocol.
Configures internet connection using a 3G modem.
Configures internet connection using L2TP protocol.
Configures wireless network parameters.
Defines SSID, Mode, Band, and Channel.
Sets up Wireless Distribution System for extended coverage.
Configures advanced wireless parameters.
Configures RADIUS-based authentication.
Configures WEP encryption for wireless security.
Configures WPA/WPA2 PSK security.
Configures WPA with RADIUS server.
Controls network access based on MAC addresses.
Sets up Push Button Wireless Connection.
Displays associated wireless clients.
Sets up wireless access policies for SSIDs.
Configures the router's firewall for network protection.
Enables or disables the firewall feature.
Configures advanced firewall options like VPN pass-through.
Sets up a DMZ host for unrestricted access.
Configures protection against DoS attacks.
Filters network access based on MAC addresses.
Filters network access based on IP addresses.
Blocks access to specific websites.
Configures advanced network features.
Configures NAT for private network access.
Sets up port mapping for service redirection.
Configures port forwarding for internal servers.
Configures port triggering for specific applications.
Configures ALG support for applications.
Configures Universal Plug and Play feature.
Manages traffic prioritization and bandwidth.
Sets bandwidth limits for traffic.
Configures static routing rules.
Accesses various router management tools.
Changes the router's administrative password.
Configures router time synchronization.
Sets up Dynamic DNS services.
Enables/disables power saving for WLAN.
Runs network status diagnostics.
Upgrades the router's firmware.
Saves and restores router configurations.
Resets the router to default settings.
Shows system status when operating as a repeater.
Manages LAN settings in repeater mode.
Manages WLAN settings in repeater mode.
Details LAN tab configuration for repeater mode.
Displays system logs for repeater mode.
Shows bandwidth monitoring for repeater mode.
Selects language for repeater mode interface.
Configures wireless parameters in repeater mode.
Basic wireless setup for repeater mode.
Scans for available wireless routers to act as a parent.
Lists associated wireless clients in repeater mode.
Sets access policies for repeater mode.
Accesses management tools for repeater mode.
Changes admin password for repeater mode.
Sets time synchronization for repeater mode.
Diagnoses network status for repeater mode.
Upgrades firmware for repeater mode.
Manages configurations for repeater mode.
Resets the router in repeater mode.
Website for latest product information and downloads.
Statement on compliance with FCC rules and conditions.
Information on FCC radiation exposure limits.
Statement on compliance with Industry Canada rules.
Information on IC radiation exposure limits.
