42
www.encore-usa.com
5.4 Wireless Settings
¾ Basic Tab
In Basic tab page, you can set wireless Radio Disable or Enable, WDS, AP or Repeater
Mode, Band selections, Number of SSID’s up to 4, Enable / Disable Auto Channel and
Channel number.
Radio: You can turn on/off wireless radio. If wireless Radio is turned off, the
ENHWI-3GN3 will not take wireless connections.
Mode: Three operation modes for selections, the AP router and AP router with
WDS. If you choose AP Router Mode, there will be two selections under it,
the AP or WDS function in the drop-down menu.
Band: You can select the wireless standards running on your network environment
such as the following:
2.4 GHz(B): If all your clients are using 802.11b
2.4 GHz(N): If all your clients are using 802.11n
2.4 GHz(B+G): If both 802.11b or a 802.11g
2.4 GHz(G): If all your clients are using 802.11g
2.4 GHz(B+G+N): If your clients are mixed using 802.11b, 802.11g, or
802.11n
To Next Page
Loading...
Need help?
General
Weight and Dimensions
