43
www.encore-usa.com
Enable SSID: ENHWI-3GN3 supports up to 4 SSID’s. Use the down arrow to select
the number of SSID you wanted to have in your wireless LAN. Once
established you can set the security policy settings for each. See
“Policy” section for more details.
SSID1 to SSID4: Whatever is entered into the SSID block that will be the name of your
wireless network. It is recommended to use a unique name to identify
your wireless device in the WLAN such as “Guests”, “Home”, etc. This
is case sensitive and up to 32 printable characters.
Auto Channel: Disabled by default. If Enabled, will automatically search all channels
and automatically change to the clearest channel detected. Different
items are visible below the Auto Channel.
Channel: Channel 11 by default. This is visible only when the Auto Channel is
disabled. You can enter your preferred channel number here for the
ENHWI-3GN3 wireless LAN.
Check Channel Time: This menu is visible only when the Auto Channel is enabled.
Selections are from One Hour to One Week. This is the duration of
when will the ENHWI-3GN3 check for and use the clearest channel in
the area automatically.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
