13
www.encore-usa.com
3. SMART WIZARD
Connects your computer to the ENHWI-3GN3 router
and set up basic settings the easy way
Before you start the ENHWI-3GN3 router’s Smart Wizard, check for the
followings:
It is recommended using the Ethernet cable connection when running the Smart Wizard for
accuracy purposes.
• Internet connection should be running & ready for internet use (3G internet
connection, ADSL or Cable modem).
• ADSL Modem or Cable Modem must have an RJ-45 LAN port, DSL or Cable
modem usually are supplied by your ISP or Internet Service Provider
• Microsoft Windows compatible PC/Notebook with UPnP enabled Network Interface
Card adapter. (This can be found in your network cards advanced properties within
MS Windows) Optional, this is if you prefer to use the UPnP feature.
• CAT 5 or better network Ethernet cable(s) with RJ-45 connector for PC/Notebook
connections. (** RJ-45 looks like a telephone cable connector but bigger)
To Next Page
Loading...
