WIZARD
Click Wizard to configure the basic functionalities of the ENHWI-N3 Router. A popup
Setup Wizard Window will be immediately displayed. If the popup window for Setup
Wizard failed to appear check your Popup Settings and make sure popup is allowed
at least temporarily for this purpose. Before you continue, check all the needed
cables if they are properly hooked up. Check your DSL or Cable Modem if working
properly and is connected to your ISP and then click <Next>. Refer to the Smart
Wizard section for more details.
INTERNET
- Status
This page shows the current Internet connection type and status
36
To Next Page
Loading...
