Enable / Disable UPnP: You can enable or Disable the UPnP feature here.
After you enabled the UPnP feature, all client systems
that support UPnP, like Windows XP, can discover this
router automatically and access the Internet through this
router without having to configure anything. The NAT
Traversal function provided by UPnP can let
applications that support UPnP connect to the internet
without having to configure the virtual server sections.
- Quality of Service (QoS)
QoS can let you classify Internet application traffic by source/destination IP
address and port number. You can assign priority for each type of application
and reserve bandwidth for it. The packets of applications with higher priority will
always go first. Lower priority applications will get bandwidth after higher priority
applications get enough bandwidth. This can let you have a better experience in
using critical real time services like Internet phone, video conference …etc. All
the applications not specified by you are classified as rule “Others”.
Priority Queue
This can put the packets of specific protocols in High/Low Queue. The packets in
High Queue will process first.
72
To Next Page
Loading...
Need help?
General
