ENXTV-3 - User Manual
10
Chapter 4: Using the Remote Control
The included infrared remote control allows you to operate ENXTV-X3 remotely, such as
turning your TV on/off, changing channels, adjusting volume, etc. Aim the front of the
remote control at the remote control receiver and press the control buttons as you would
on the infrared receiver.
4.1 Installing Batteries
Open the back cover of remote controller and put in two pieces of AAA
batteries (alkaline battery recommended).
4.2 Remote controller functions
1. Power: power on/off control.
2. MUTE: Volume mute or resume.
3. Numbers: Program number select
4. - / --: To choose Single or Double digits channel entry format.
5. RECALL: Return to the previous channel last viewed.
6. TV/AV: Source select.
7. PC/TV: Switch to select PIP PC mode or full screen TV mode.
8. CH+: Channel Up.
9. CH-: Channel Down.
10. VOL+: Volume Up.
11. VOL-: Volume Down.
12. MENU: When in Full Screen Mode, this key is use for settings.
When in PIP Mode, this is use to move the PIP screen in
conjunction with the CH+/- keys to move PIP screen high and low,
and with the VOL +/- keys to move the PIP screen right and left
13. EXIT: Exit form current Menu setting.
14. PIP: Enter into PIP mode.
15. MODE: When in PIP Mode: MODE key is use to change the
PIP screen display size. When in Full Screen Mode: MODE key is
use to change the HDTV1080P resolution settings.
16. MULTI-DISPLAY: Multi-picture display. Displays up to 16 video
Windows.
17. SKIP: Skip / No skip current TV channel.
18. SLEEP: Set to Sleep timer and Off Sleep.
19. SYS: N/A
20. OSD: On Screen Display
To Next Page
Loading...
Need help?
General
